SAEQ Morpheus - Reference headphone amplifier, like new





SAEQ Morpheus - Reference headphone amplifier, like new
1 unit in stock.
Like new with full warranty.

In Greek mythology, MORPHEUS is one of the sons of the god Zeus, responsible for dreams of pleasure. The main purpose of the MORPHEUS headphone amplifier is to provide you with a dreamlike listening experience.
The subtle presentation and flexible connection options give this amplifier incredible potential to transport you into a zone of pleasure, close to beautiful dreams.
The new reference series gives MORPHEUS incredible potential to transport you into a zone of pleasure, close to beautiful dreams. MORPHEUS becomes your true deity the moment you hear it. It performs effortlessly at all levels with all types of headphones.
The basic topology could be summarized as follows
- Discrete elements
- Careful selection of components
- Transistors with an output power of 180 watts per channel.
- Transistor preamplifiers operate in pure Class A
- The volume is regulated by a dual attenuator with 24 positions.
- Single-ended input with lateral FET transistors
- Rigid housing
MORPHEUS can drive the following types of headphones
- electrodynamic
- planar
- via transformer interface (RAAL & RAAL 1995)
The sound reproduction is transparent, clear, and relaxed. One could say that it is a smaller version of the famous HSA-1c.
Up to four headphones can be connected, with the option of equalizing the volume of each headphone. This allows four people to listen to music simultaneously, even when the headphones have different sensitivities, ensuring great flexibility and ease of use.
Specifications
|
Load Impedance headphones out - direct |
8- 600 ohms |
|
Load Impedance speakers out |
---- |
|
Output Power : |
8W/8 ohms, 4.5W/16 ohm, 2.2W/32ohm, 1.1W/64ohms, 0.6W/120 ohms, 0.3W/300 ohms, 0.15W/600 ohms at 1khz/sine |
|
Frequency Response: |
500mv/ in/sine. 15hz – 500kHz (-1dB/ -2dB) |
|
Power Bandwidth: |
Better than 10-100kHz (-0.5db) at 1W |
|
Distortion: |
Better than 0.5% at 1khz |
|
Signal to Noise Ratio: |
Better than 95dB |
|
Input Impedance: |
40kΩ |
|
Input Sensitivity for full OUT: |
0.9V AC |
|
Input Connections: |
INPUT 1- 2 RCA Single-Ended, INPUT 2 - 2 XLR 3-pin Balanced (female) |
|
Output Connections: |
1 x XLR 4-pin female +6.3mm stereo jack-direct, 1 x XLR 4-pin female + 6.3mm stereo jack - attenuation -6dB (balanced Planar & Dynamic headphones) |
|
Max Power Consumption: |
30W, without signal 10W |
|
Working voltage: |
115V/230VAC (selector switch) or 100V (requires internal connection) In function selector position |
|
Dimensions: |
Height 90mm, Width 238mm, D 280mm |
|
Weight: |
net 4.7 kg / gross 6.0 kg |