Skip to content
Delivery time approx. 1-2 weeks
Analog headphone amplifier
The PRO in the name deserves HPA V550 PRO, through its 256-stage relay. This makes even finer tuning possible.
The HPA V550 PRO offers one of the most powerful headphone amplifiers on the market thanks to its incomparable technology.
Simply brilliant
The HPA V550 PRO's function is limited to purely analogue values, namely the headphone playback and the preamplifier function.
The latest developments from the multiple test winners from Violectric and Niimbus were implemented in the headphone amplifier. The preamplifier functionality has also been raised to a new level in the V550 Pro.
So that you can concentrate on your listening pleasure, every function can be controlled via the remote control.
The HPA V550 PRO corresponds to the test winner DHA V590 - but without a D/A converter.
Overview
- Least noise - due to a very small internal gain. This means that the amplifier's own noise is inaudible.
- High output voltage - due to 50 volt internal operating voltage. Therefore ideal for high-impedance headphones.
- High output power - through powerful amplifiers that can deliver far more power than even the most demanding headphones can need. Therefore ideal for headphones with low impedances and also magnetostats.
- High damping factor - due to lowest output impedance. Therefore ideally suited to controlling even the most difficult headphones without any influence, with a guarantee of an uncompromising frequency response.
-
Remote control - Control the HPA V550 PRO remotely with its elegant remote control milled from one piece. Via infrared you get access to the motorized volume control, mute, input selection, resampling settings, headphone and line out control.
FEATURES
- 256 finely tuned volume levels
- Remote control for volume, mute, input selection, resampling, output selection
- Motorized volume controls
- Balance controller
- 3 analog stereo inputs: 2 x unbalanced via RCA, 1 x balanced via XLR
- +/- 18 dB pre-gain for optimal adaptation of the HPA V550 Pro to the source and headphones
- 4 powerful amplifiers, 6400 mW Pmax at 50 ohms, 21 V RMS at 600 ohms
- Monitoring the headphone outputs for DC voltage and overload
- Headphone path and line-out path can be switched separately
- Headphone outputs: 2x unbalanced with 6.3 mm jack, 1 balanced with 4-pin XLR
- Line Out: 1 x unbalanced via Cinch, 1x balanced via XLR
- Adaptation of the line-out signal to the following devices in the range +/- 18 dB
- 2 toroidal transformers, > 35,000 uF filter capacity
SCOPE OF DELIVERY
- 1x Violectric HPA V550 PRO
- 1x operating instructions
- 1x remote control
- 1x power cable
TECHNICAL DATA
| Item no.: | 1007879 |
| Dimensions | 290 x 80 x 248 mm (W x H x D) |
| Color | black |
| Housing | Desktop |
| Headphone outputs | 1 (4-pin XLR, balanced) |
| Interface | USB 2.0 |
