Skip to content
Delivery time approx. 1 week.
highlight
- Absolute reference over-ear
- Optimized for professional requirements
- Open design for finest resolution
- Air Film Damping System (AFDS)
- aluminum-magnesium housing
- 2 connection cables (1.5m and 3m)
reviews
"What can I say? I'm thrilled, even though you're paying a whopping 4,000 euros. But this level of performance is rare."
Holger Biermann (LowBeats)
"The D8000 is a headphone like no other. There are so many appealing things that come together, we hardly know where to start. Design, materials, execution and implementation: full marks. Sound: surprisingly musical! The bassy performance offered is unusual for the design, but absolutely attractive. The D8000 Pro Edition is in no way inferior to the original. On the contrary, it goes one step further."
Johannes Strom (Audio Test 05/2021 / LikeHifi)
"One of the best ear speakers you can buy right now."
Fidelio (Musicalhead.de)
VGP 2021 Lifestyle Award
VGP 2020 Lifestyle Award
VGP 2020 Summer Award
VGP 2019 Summer Lifestyle Award
"Magnetostats cannot be surpassed in terms of tonal lightness, transparency and impulse pleasure. The D8000 went one step further: the Japanese have done a wonderful job of tuning it. In the test it always remained balanced and effortless."
Christian Möller
FINAL D8000 and FINAL D8000 Pro Edition
FINAL's open-design reference magnetostats are true masterpieces in precision housings made of an aluminum-magnesium alloy with a resonance-reducing coating.
The FINAL team has used a ground-up approach to think and come up with the ultimate magnetostat design. First, FINAL has chosen a round driver diaphragm that features an inwardly wound circular band of aluminum as the voice coil.
Secondly, in the D8000 models, these conductor tracks are not applied to the diaphragm with an adhesive (as in many other planar magnetic designs), but are etched as an ultra-thin aluminum coating into the surface of the foil diaphragm material.
This results in a moving mass that is one third lighter than comparable dynamic driver assemblies. And thirdly, the diaphragm has concentric corrugations that allow the diaphragm to move more linearly across its entire working surface.
By dispensing with the usual voice coil adhesives and a corrugated membrane, the D8000 drivers achieve an absolutely superior reproduction of even the most subtle high frequencies. Last but not least, the AFDS (Air Film Damping System) technology eliminates the deflection problems that usually occur with magnetostats by perfectly controlling the membrane movement even at high volumes using an air damping layer.
Sound differences between the FINAL D8000 and the FINAL D8000 Pro Edition
The D8000 Pro Edition offers the same fine sound quality as the D8000, but has undergone special pro-sound tuning of the driver units.At the request of sound engineers who often demand high playback levels from their studio headphones, FINAL has developed the Air Film Damping System (AFDS) tailored to the needs of professional recording studios.
We have reinvented the planar magnetic model driver with AFDS (Air Film Damping System)
With the development of the new AFDS (Air Film Damping System), we have achieved a sound quality that offers both the sensitive high frequencies of planar magnetic models and the voluminous and open bass of dynamic models. This product will make you make new discoveries in music you already know and you will want to listen to your favorite music again and again, confirming the joy of audio products.
characteristics
A combination of the sensitive high ranges of planar magnetic models
and the voluminous and open basses of dynamic models.
Voluminous and open basses
In conventional planar magnetic models, the amplitude increases in the low frequency range. Since the diaphragm comes into contact with magnets, the frequency of the bass had to be raised to a level that the driver unit can reproduce. To compensate for the lack of bass, the ear pads were tightly sealed inside and the front part of the diaphragm was designed as a closed space.
This is the same principle as earphones with sealed earpieces, which can reproduce bass frequencies despite their small size. By sealing the inner ear pads, it is possible to produce bass sounds over low frequency bands; these become the bass sounds produced in a sealed space, just like earphones.
In the D8000, the problem of the diaphragm coming into contact with the magnets has been solved by the AFDS (Air Film Damping System), and it has become possible to reduce the frequency of the bass,
that the driver unit can reproduce. In combination with breathable ear pads, bass reproduction with a volume
and an open sound that can only be achieved with superior dynamic models.
Subtle high frequenciesZen
When reproducing subtle high frequencies, the lightness of the diaphragm is crucial. Compared to other dynamic models of the same diameter, the D8000's diaphragm is one third lighter. A super-thin aluminum coil has been etched onto the extremely light foil diaphragm, eliminating the adhesive required between the coil and diaphragm in dynamic models, which has a very negative impact on the sound quality.
on the sound quality is not necessary. This is an important part that is filled with know-how. With D8000 this
Problem theoretically solved and reproduction of subtle high frequencies was achieved.
“The combination of the subtle high frequencies of the planar magnetic model and the volume and open bass tones of the dynamic model"
Combining the subtle high frequencies of the planar magnetic model and the volume and open bass tones of the dynamic model, the D8000 lets you discover new things when listening to music you are used to. You will want to listen to your favorite music again and again. With this product, you will realize
that high sound quality provides the impetus to experience the deeper aspects of music.
Newly developed AFDS: Air Film Damping System
In traditional planar magnetic models, the amplitude was progressively smaller in the lower region and the diaphragm came into contact with the magnets. To solve this problem, we made measurements by performing diaphragm simulations using the finite element method and laser Doppler devices and developed a new diaphragm braking technology known as AFDS - Air Film Damping System.
In this way, the problem of low reproducibility of bass tones in planar magnet models was solved. This technology could be considered a reinvention of planar magnet models.
In the D8000, the problem of the diaphragm coming into contact with the magnets has been solved by the AFDS (Air Film Damping System), and it has become possible to reduce the frequency of the bass, that the driver unit can reproduce. Combined with breathable ear pads, bass reproduction is possible with a volume and open sound that can only be achieved with superior dynamic models.
Designed for long life and easy repair
To allow for repairs and future upgrades, almost every part has been designed to be disassembled, allowing the product to be used for many years after purchase.
A housing made of an aluminum-magnesium alloy
To establish AFDS, an extremely high level of precision is required compared to conventional drivers. For this reason, the housing was manufactured from an aluminum-magnesium alloy with great precision.
By using a leather coating, as used on high-quality cameras, we have taken measures against even the smallest vibrations.
This model is manufactured in our own factory and stands for precision.
The D8000 model is manufactured at our headquarters in Kawasaki. In addition to the precision of the individual parts, the precision of the assembly process depends on the precision of the tools known as jigs and fixtures
that support the assembly process. In order to compensate for even the smallest irregularities in the precision of the devices during the assembly process, we design and manufacture production and measuring devices ourselves.
We have developed manufacturing equipment such as a membrane forming machine and a membrane tension measuring device in-house specifically for the D8000.
To make really good products, you have to get to the core of the manufacturing process of parts close to the raw material. The good thing about "Made in Japan" is that you can gain the cooperation of the manufacturers who are close to the material. By controlling everything together, from sourcing the raw materials to assembling the product, we have achieved high quality products.
Newly developed detachable cable
We have developed a new cable for the D8000. Two types of cables are included in the package - a 3.5 mm mini plug (1.5 m) and a 6.3 mm standard plug (3 m).
- Cable length: 1.5 m
- Input: 3.5 mm, 3-pin
- Output: 3.5 mm, 2-pin with locking function
- Compatible Models: D8000/D8000 Pro Edition, SONOROUS VIII/VI/IV/III/II
- Cable length: 3 m
- Input: 6.3 mm, 3-pin
- Output: 3.5 mm, 2-pin with locking function
- Compatible Models: D8000/D8000 Pro Edition, SONOROUS VIII/VI/IV/III/II
D-Series headphone case
New briefcase style carrying case with * TRAVEL SENTRY® certified lock accessory. * “TRAVEL SENTRY” is a registered trademark of Travel Sentry, Inc.
Newly developed open ear pads
In closed and open headphones, the sealing of the ear pads provides a characteristic extension of the playback frequency to bass frequencies that the driver unit could not originally reproduce.
To ensure high-quality reproduction of the natural distribution of bass frequencies that the original sound originally has, it is necessary that the driver unit itself is capable of reproducing bass frequencies and that breathable ear pads are used that are not tightly sealed.
All conventional planar magnetic models and many dynamic models have a deficiency in terms of bass frequencies with ear pads,
that are not tightly sealed.
In the D8000, the bass frequency reproduction range has been expanded by AFDS, and it has become possible to adequately reproduce bass frequencies even with loose ear pads, simply by the ability of the driver unit. The ear pads, which have a major impact on sound quality, have been newly developed specifically for the D8000 using highly breathable foam and special fibers.
color variation
2 color variations: BLACK and SILVER
Technical data
- Housing D8000: Aluminium-magnesium alloy, black finish
- Driver: Planar magnetic with AFDS (Air Film Damping System)
- Etched aluminum conductor tracks without weighty adhesive
- Cable: OFC cable 1.5ｍ (with 3.5mm jack plug) / OFC cable 3m (with 6.3mm jack plug)
- Efficiency: 98dB/mW
- Impedance: 60Ω
- Weight: 523g
scope of delivery
- headphone stand
- OFC cable with 6.35mm jack plug, 3m
- OFC cable with 3.5mm jack plug, 1.5m
- operating instructions
