Delivery time approx. 1 week
Burson Audio Soloist 3 GT
High-End headphone amplifiers and preamplifiers
The Soloist 3 GT is optimized for unbalanced operation with a shorter signal path and fewer active components. By using a higher power transistor, it delivers 10 watts to unbalanced headphones. With its puristic design and enormous performance, the Soloist 3 GT is the ultimate machine for any single-ended audio system.
The power supply of the Soloist 3 GT is based on five sets of Burson Max Current Power Supplies. Burson pushes these MCPS to the limits of their potential. So much so that they consume 90 watts when idle and have to be actively cooled. An active, quiet NOCTUA cooling system was used for this. Although the Soloist 3 GT can output up to 10 watts, its goal is not maximum power, but maximum purity in sound. The discrete V6 Vivid operational amplifiers are considered to be among the best in the world and are used in many recording studios. The Soloist 3 GT uses three V6 Vivid operational amplifiers per channel, achieving incredible transparency. Ordinary stereo volume controls create a lot of interference between channels. The Soloist 3 This is not the case with GT because each channel uses a MUSES72320 together with a discrete V6 Vivid buffer, thus eliminating any risk of interference.
We feel the sound as much as we hear it. Before headphones, listening to music was always a whole-body experience. That's why the Soloist 3 GT has a connection for an external active subwoofer. This allows you to hear the detailed, finely resolved sound through your headphones and at the same time feel the bass from the subwoofer in your body. With the Soloist 3 GT gives you the opportunity to reach a new level of music listening through headphones – hear and feel the sound!
connections
Outputs:
- 2x 6.3 mm headphone output
- 1x Cinch (RCA) preamplifier output
- 1x Cinch (RCA) subwoofer output
- 24V/5A power connection
- 12V Trig Out
Inputs:
- 2x Cinch (RCA)
- 2x microphone bypass (1x on front, 1x on back)
- 12V Trig In
specifications
- High-End headphone amplifiers and preamplifiers
- 10 watts single-ended Class-A headphone amplifier
- reference class preamplifier
- Reference class volume control with 2x MUSES72320 and 2x discrete V6 Vivid Buffer
- Five sets Burson Max Current Power Supplies
- Active quiet cooling with NOCTUA
- Burson V6 Vivid operational amplifier (replaceable if required)
- Easy-to-read OLED display
- Headphone+Subwoofer mode: Connection option for external active subwoofer to listen to music via headphones and also feel the bass via subwoofer
- The Soloist 3 GT has three levels of hardware-based crossfeed emulation.So you can listen to your favorite song exactly the way you like it!
- 3 gain levels so that the soloist 3 GT supports all headphones
- Dimensions: 255 x 270 x 70 mm
- Weight: 5 kg
Technical data
- Input impedance: 35 KOhm
- Frequency range: 0 – 48 kHz (± 1 dB)
- THD: <0.0015%
- Output impedance headphone amplifier: 0.5 Ohm
- Preamplifier output impedance: 25 Ohm
- Performance Single-Ended:
Impedance 16 Ohm / 10 Watt / SRN 112 dB / Separation 99%
impedance 32 ohms / 8 watts / SNR 110 dB / Separation 99%
Impedance 100 Ohm / 3.8 Watt / SNR 11 dB / Separation 99%
Impedance 150 Ohm / 1.3 Watt / SNR 110 dB / Separation 99%
Impedance 300 Ohm / 640 mW / SNR 109 dB /Separation 99.5%
scope of delivery
- Burson Audio Soloist 3 GT
- High-quality remote control made of aluminum
- power supply and power cable
- spare fuse and Allen key
- replacement IC operational amplifier
- operating instructions in English
