Ferrum Hypsos Dual Output - High-End Power Supply
Ferrum Hypsos Dual Output - High-End Power Supply
Ferrum Hypsos Dual Output - High-End Power Supply
Ferrum Hypsos Dual Output - High-End Power Supply

Ferrum Hypsos Dual Output - High-End Power Supply

CHF 1,395.00
trust

Delivery time approx. 1 week

For Ferrum, it made sense to continue the journey in the HiFi chain. It brought us OOR, our flagship headphone amplifier, ERCO, our entry-level DAC and WANDLA, the converter.

What these products have in common is their power requirements. And one of the features of HYPSOS is its enormous power reserves.  The power reserves are so abundant that HYPSOS could actually easily supply two devices simultaneously, provided they have the same supply voltage requirements.

While we first offered our Ferrum Power Splitter, we now offer HYPSOS with two power outputs. This means that you can now connect two Ferrum devices, e.g. OOR and WANDLA (or two other devices with the same power requirements) at the same time, without the need for another external component and the associated cable clutter.

Dual output HYPSOS brings you an additional level of upgradability at an exciting price point, proving once again that Ferrum's journey to change the landscape of high-end audio in terms of affordability is indeed an ongoing saga.

HYPSOS Dual Output

Comes with a high quality DC power cable that can be connected to most commonly used DC inputs upon request. Custom cables can be made to order.

Detailed and insightful, but not tiring sound

Brings your current audio system to its full potential. Customize the sound by changing the voltage level on the fly and using the preferred combination of 4-Terminal Sensing and Spread Spectrum Mode settings.

Hybrid performance system

Linear/switching hybrid design to take advantage of the benefits of both technologies - low ripple and noise, fast transient response and high efficiency.

Different user levels

Use pre-configured settings from the list of supported devices or manually set your own parameters. Wide continuous output voltage range of 5-30V with up to 6A current delivered to the load. HYPSOS is the most universal device available.

Sweet Spot Tuning (SST)

Ability to fine tune output voltage for best sound. Voltage level can be safely adjusted during operation to allow easy comparison testing.

4T Sensor Design (4TSD)

Ensuring the exact voltage level at the DC input terminal of the powered device - special cable design and feedback to ensure a consistent voltage at all times. This technique eliminates the damaging effects of cable resistance and improves transient response.

Advanced automation

Compatibility with Apple TV remote control, trigger in/out port; ability to automate the switching on of devices with standby mode even without a dedicated trigger port.

Extremely safe to use

Automatic transformer voltage adjustment (ATVA), electronic output voltage polarity switch as well as overvoltage, current limit and short circuit protection.

Specifications Ferrum HYPSOS Dual Output 

  • Power input: 110-120V AC & 220-240V AC / 50-60 Hz (EU/US)
  • 100 V AC / 50-60 Hz (JP)
  • Mains connection: IEC C14 mains connection, fuse holder, on/off switch, two-stage EMI filter
  • Power cord: EU, UK, AU or US
  • DC output cable: 5.5 x 2.5 mm or 5.5 x 2.1 mm DC plug
  • The voltage, current and power data given below apply to both outputs together. The same voltage is present on both outputs. Current and power are combined from both outputs. The 4TSD functionality is only active on the main output.
  • DC output voltage range: 5-30 V
  • Maximum continuous output power: 60 W
  • Max. continuous output current: 6 A
  • Primary winding fuse: IEC 5×20 mm, 250 V 3.15 A, slow blow (JP)
  • 250 V 2 A, slow-blow (EU/US)
  • Power consumption: At 230 V AC / 50 Hz and 12 V DC output:
  • without load (idle) - 6 VA, ~ 80 W load - 133.9 VA
  • Dimensions (W x D x H): 21.7 x 20.6 x 5 cm / 8.6 x 8.1 x 2 inches (without knob, feet and connectors)
  • Net weight: 3.05 kg / 6.72 lbs

 

trust