Audio-GD R-2 MK2 - R2R DAC

CHF 599.00
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC
Audio-GD R-2 MK2 - R2R DAC

Audio-GD R-2 MK2 - R2R DAC

CHF 599.00
Color (Design)

Delivery time approx. 1-2 weeks

Fully discrete R-2R ladder DAC with native DSD, FPGA processor & Class A output stage for a maximally musical, analog sound.

Highlights

  • Fully discrete R-2R ladder DAC (digital-to-analog converter)

  • 4 groups of fully discrete R-2R D/A converters in push-pull mode

  • 2 fully discrete native DSD decoders

  • Integrated range of OS (oversampling) and NOS (non-oversampling) modes

Key features & equipment

  • Converter architecture: 4 groups of fully discrete R-2R PCM decoders in push-pull operation, plus 2 groups of fully discrete, native DSD decoders (fully balanced).

  • USB interface: Asynchronous Amanero Combo 384 module (supports up to 32-bit / PCM 384 kHz / DSD512). The USB module has no data clock generators of its own; instead, it receives the clock signal directly from the FPGA processor for more precise signal transmission.

  • Analog output stage: Completely discrete transistor design. Uses feedback-free high-speed ACSS amplifiers (operates in current mode without constant current-to-voltage conversion) and a Class A diamond differential output stage that avoids switching distortion.

  • Power Supply: Elaborate power supply design with 3 ultra-fast linear power supplies, 3 pure Class A power supplies, and 2 servo power supplies.

  • Sound Modes & Filters: Integrated oversampling modes (2X, 4X, 8X digital filters) as well as NOS modes (non-oversampling) for custom sound adjustment. There is also a special mode that simulates the tonal character of vinyl records.

  • Additional Features: Asynchronous DSD clock technology and DoP support (DSD over PCM) via the SPDIF input.


Technical Highlights (FPGA & Parallel Processing)

  • FPGA & CPLDs: The heart of the digital signal processing consists of an FPGA and three CPLDs. Since their logic is programmed via software, sound quality and features can be improved through firmware updates. The FPGA also handles SPDIF demodulation and jitter suppression using FIFO buffering.

  • Parallel data processing: Instead of processing data serially (bit by bit over 64 clock cycles), the R-2 MK2 converts input signals (IIS, USB, HDMI, SPDIF, DSD) into parallel data streams. This means a complete data frame requires only a single clock cycle, minimizing the effect of clock fluctuations while also compensating for resistor tolerances in the R-2R ladder.


R-2R vs. Delta-Sigma 

  • Advantages of R-2R: The clock signal does not bleed into the output signal, the circuit is extremely insensitive to jitter, and the output signal level is more precise than with Delta-Sigma converters.

  • Challenges: Harmonic distortion is somewhat higher than with top Delta-Sigma chips (such as the ES9038 PRO), and switching errors (glitches) and resistor tolerances are technically difficult to manage—which Audio-gd addresses here through extremely fast parallel control via FPGA.


Specifications

  • Signal-to-noise ratio (S/N ratio): > 110 dB

  • Output impedance: 10 Ohm

  • Output level: 2,5 V (RCA / RCA)

  • Frequency response: 20 Hz – 20 kHz (< -0,5 dB)

  • Total harmonic distortion + noise (THD+N): < 0,02 %

  • Input sensitivity: 0,5 Vp-p (75 Ohm, coaxial), USB 1.0 – USB 3.0

  • Supported operating systems (USB): Windows, OSX, Linux, iOS (listed as “ISO” in the original)

  • Supported sampling rates:

    • USB & IIS: 44,1 kHz – 384 kHz / 32 Bit, DSD64–512

    • Coaxial mode: 44,1 / 48 / 88,2 / 96 / 176 / 192 kHz

  • Power supply:

    • Version 1: 100–120 V AC, 50/60 Hz

    • Version 2: 220–240 V AC, 50/60 Hz

  • Power consumption: 9 W

  • Package weight: approx. 3,5 kg

  • Dimensions: W 240 × L 240 × H 85 mm (solid aluminum, incl. feet, excluding protruding connectors/controls)

  • Accessories: 1× power cable, 1× USB cable