Satin Audio HYPERION - Audio Essence
Satin Audio HYPERION - Audio Essence
Satin Audio HYPERION - Audio Essence

Satin Audio HYPERION 8x / 2.5mm / 2-PIN - single item

CHF 129.00 Normal price CHF 159.00

single piece 8x / 2.5mm / 2-PIN - special price
available immediately

High-performance cable made of high-purity silver-plated copper

Satin Audio Hyperion is manufactured using the best wire production technologies such as highest purity of materials, SP-OCC, stranded wire.

Satin Audio Hyperion has wires made of high-purity OCC silver-plated copper with purity grade up to 7N ( 99.9999%). Also, copper is known to be one of the most conductive materials, so the highest purity of copper results in the highest conductivity. Based on the International Annealed Copper Standard (IACS), the conductivity of copper is 100% IACS, while that of OCC copper is up to 103% IACS. At the same time, the conductivity of silver is up to 105% IACS, while that of OCC silver reaches 107% IACS. This means that thanks to the OCC technology, the conductivity of silver and copper could be significantly increased.

SP-OCC (Superior Pure Ohno Continuous Casting) is the most advanced casting technology developed to defeat annealing problems and virtually eliminate all grain boundaries in copper or silver with a unique, patented process. Satin Audio SP-OCC cables are made in one of the few factories in the world that can apply this advanced technology. The Type 2 construction helps to keep the impedance constant and improve the LCR values ​​of the cables in general. The Type 2 construction is that each wire is twisted together, and then these bundles of twisted wires are further twisted around a central nylon cushioning core.

Litz is the technology developed to reduce losses reduced by skin effect and proximity effect in conductors. Thanks to Litz, there's no chance of the wires getting oxidized and turning green.

The new SA Insulation II looks much better, is completely transparent, and stays soft all the time, so the wires don't look bad even after not harden or break after prolonged use. Using nylon as a dampening core in each strand helps minimize vibration and improve cable durability.

Satin Audio Hyperion offers the following cable options: standard 4 strand, 6 strand, and 8 strand with numerous options for Connectors and plugs for a variety of IEMs. The 6 and 8 braids are designed for some of the highest performing and highest quality IEMs. Thanks to a reasonable dimensioning of 28awg per polarity, an 8-strand braided cable is still compact and flexible.

connection variants

Almost anything is possible

Almost all conceivable connection variants are possible. If the variants you require are not listed, please contact us. We will do our best to source your dream cable.

Technical data
  • Length: 1.2m (other lengths available on request)
  • SP-OCC Pure SPC type 2 strand
  • 28AWG
  • Superior pure OCC SPC
  • Nylon Dampening Core
  • Audio Quality Cardas Audio Quad Eutectic Lot from USA
  • Handcrafted in Vietnam


Aboutaudio Review