Skip to content
At the supplier's warehouse (approx. 1 week)
Test at home
N3Pro HR-Player + YB04 Balanced Armature In-Ear Headphones Bundle at a special price
The bundle includes
- 1x Cayin N3Pro High Resolution Player
- 1x Cayin YB04 in-ear headphones
N3Pro HR player with R ö audio and transistor output
The new Cayin N3 Pro gives its owner the choice. The HR player offers two options for sound tuning. With its timbre selector it routes the audio signal over a circuit branch with vacuum r ö hre or transistor (via the 3.5 mm jack output). There is also a dual R ö operating mode: triode and ultra-linear (via the 3.5 mm jack output). This means that everyone can subtly adapt the sound to their H ö r habits.
Behind the R ö hren level there is a pair of selected JAN6418-R ö hren, which are protected against vibrations and shocks by silicon bearings and flexible circuit boards. The small, economical, directly heated pentodes also meet military specifications. The audiophile hi-res player can also prove itself in outdoor use. Double Asahi Kasei AK4493 DACs decode up to 32 bit / 384 kHz and DSD256 natively. After the D / A conversion, the signal goes through a fully balanced circuit with 4.4 mm and 3.5 mm headphone outputs.
The powerful symmetrical headphone output provides up to 800 mW at 32 Ω and thus also drives low-efficiency headphones. The Cayin N3 Pro also provides two line and two digital outputs and can be operated as a USB DAC on a PC. On top of that, the pocket player allows Hi-Res Bluetooth transmission DAC (LDAC, UAT, AAC).
Operation is via a 3.2-inch touch screen with clear menus that is easy to read from the side. A multi-colored LED completes the user feedback. The window, which gives a view of the glowing R ö hren, is only used to increase the pleasure of the solidly designed, 195 gram player.
Highlights
- Two options for sound tuning: vacuum tube and solid state (via 3.5 mm unbalanced output)
- Dual tube operating mode: triode and ultra-linear (via 3.5 mm unbalanced output)
- Selected pair of JAN6418 tubes in mechanically suspended vibration protection
- Dual AK4493 DAC decodes up to 32Bit / 384kHz and DSD256 native
- Fully balanced circuit with 4.4 mm and 3.5 mm headphone outputs
- Powerful balanced headphone output, up to 800mW @ 32Ω
- 2 line outputs, 2 digital outputs, USB DAC
- Hi-Res Bluetooth transmission DAC (LDAC, UAT, AAC)
Scope of delivery
- USB-C charging and data cable
- Transparent silicone protective cover
Technical details
- DAC ： AK4493EQ × 2
- Tube assembly ： JAN6418 × 2
- Bluetooth version: BT V4.2
- Firmware upgrade ： OTA and manual (via TF / MicroSDcard)
- Display: IPS 3.2 ”（480 * 360）
- Battery ： 3.7V 4300mAh
- Dimensions: 115.2 x 63.5 x 18.5mm
- Weight ： 190g
3.5mm headphone output
- 32Ω 250mW
- 150Ω 53mW
- 300Ω 27mW
- Frequency range 20Hz-20kHz (± 0.2dB, Fs = 192kHz)
- 3Hz-80kHz (± 3dB, Fs = 192kHz)
- THD + N 0.003% （1kHz, 20Hz-20kHz, A-weighting）
- Dynamic range 118dB （20Hz-20kHz ， A-weighting）
- Signal-to-noise ratio 118dB （20Hz-20kHz ， A-weighting）
- Channel separation 75dB （1kHz ， Fs = 44.1kHz）
- Output impedance 0.6Ω
3.5mm (tube)
- 32Ω 130mW
- 150Ω 30mW
- 300Ω 15mW
4.4mm headphone output
- 32Ω 800mW
- 150Ω 220mW
- 300Ω 110mW
- Frequency range 20Hz-20kHz (± 0.2dB, Fs = 192kHz)
- 5Hz-80kHz (± 3dB, Fs = 192kHz)
- THD + N 0.002% （1kHz, 20Hz-20kHz, A-weighting）
- Dynamic range 119dB （20Hz-20kHz ， A-weighting）
- Signal-to-noise ratio 119dB （20Hz-20kHz ， A-weighting）
- Channel separation 110dB （1kHz）
- Output impedance 1.0Ω
Line-Out
3.5mm LO output voltage
- 2.0V （@ 10kΩ resistor, line output setting: High）
- 1.5V （@ 10kΩ resistor, line output setting: Mid）
- 1.0V （@ 10kΩ resistor, line output setting: Low）
4.4mm LO output voltage
- 4.0V （@ 10kΩ resistor, line output setting: High）
- 3.0V （@ 10kΩ resistor, line output setting: Mid）
- 2.0V （@ 10kΩ resistor, line output setting: Low）
3.5mm / 4.4mm LO
- Frequency range 20Hz-20kHz (± 0.1dB, Fs = 192kHz)
- 5Hz-80kHz (± 3dB, Fs = 192kHz)
- THD + N 0.0008% （1kHz, 20Hz-20kHz, A-weighting）
- Dynamic range 118dB （20Hz-20kHz, A-weighting）
- Signal-to-noise ratio 118dB （20Hz-20kHz, A-weighting）
- Channel separation 100dB （1kHz, Fs = 44.1kHz）
Reviews
Headfonia Review
Stereoplay Review
Fairaudio Review
Headbox Review
Lowbeats Review
Lite Magazine Review
Premium in-ear headphones Cayin YB04 with Quad Driver Balanced Armature
The YB04 is the first headphone developed by Cayin ö rer. Its technology turned out to be extremely complex: It is an in-ear monitor with Quad Driver Balanced Armature. For the mid bass and mid treble, Cayin uses Sonion 33AJ007 and Knowles SWFK-31736. The auricles of the head ö rers were machined with CNC milling from a piece of aluminum for the aerospace industry. The shape of the case was designed by evaluating feedback from tens of thousands of users. This ensures that the Cayin YB04 is comfortable to wear. This wearing comfort and the distortion-free reproduction erm ö were like the head ö rer for a long time while relaxing and enjoying music.
With the YB04 you acquire 26 years of experience in the development of Cayin audio products. This forms the basis for developing a headset with excellent dynamics, transparency and pure, natural sound. The high level of effort is also reflected in the development of the crossover. It is the result of a long series of tests with various components and a final selection based on H ö rtests.
Cayin attached great importance to a neutral coordination and refrained from emphasizing or conspicuously emphasizing the YB04 with outstanding sound effects such as H ö close thick bass to the " Ear Catcher ". This predestines it as the perfect partner for the popular Cayin HR players N8, N6MK2 and N3-Pro.
Technical details
- Driver: Sonion 33AJ007, Knowles SWFK-31736
- Housing: aluminum
- Sensitivity: 113 dB at 1 kHz
- Impedance: 30 Ohm
- Frequency response: 18 Hz ~ 35 kHz
- Cable: The cable is 1.3 m long and made of eight wires. Four of them are 6N single crystal copper wire and the other four are silver alloy wires. The plug is made of gold-plated brass.
Reviews
